The in-line turbidity sensor is designed by the principle of scattered light turbidity measurement. When a beam of light is injected into the water sample, the light is scattered by the turbidity material in the water sample. By measuring the intensity of the scattered light vertical to the incident light and comparing with the internal calibration value, the turbidity in the water sample is calculated, and the final value is output after linearized treatment.

 main parameter

Measurement principle: scattered light method

Measuring range: 0~1000.0NTU

Resolution: 0.1 NTU / 0.1℃

Measurement accuracy: ± 5% or ± 3 NTU

Calibration method: two-point calibration

Temperature compensation: Automatic temperature compensation (Pt1000)

Output mode: RS-485 (Modbus / RTU)

Working conditions: 0~50℃,<0.3MPa

Storage temperature: -5~65℃

Shell material: POM, ABS

Installation method: immersion installation, 3 / 4 " NPT pipe thread

Cable length: standard with 10 meters, customizable

Power consumption: 0.3W@12V

Power supply voltage: 12~24VDC

Protection level: IP68